New Lids

So we are always trying to improve what we are doing and most of which is behind the scenes with jigs and material to speed up the process. The latest mission is to take a material typically used for outdoor signs and make a lid out of it!
 So the material is Polyethylene sandwiched between two thin layers of aluminum. It's lightweight and strong and comes in so many different colors that it will blow your mind....even wood grain (depending on availability from manf of course).
  Right now we have a bending jig made that makes a killer clean bend. Our challenge is to find the right sealer and the cut of the corners to make it as clean as possible but we are close!

Some of the colors are:

 

   If this performs like we think it will it may even be possible to etch on it which will essentially remove the paint and expose the Aluminum below...should be a cool look, if not we have a weatherproof Team Cordwood Decal that looks killer! Stay Tuned!

UPDATE!!!
Ok so we finally had some samples etched and man are they gonna be cool! Here are a couple pics I just took of what we tried!

 

04/27/2015

The final product!!! We are opting for the single pass laser etch, gives it a golden hue.

***UPDATE***

\Due to the cost f this product being volatile we have discontinued the use of it. While this may be a temporary issue the bottom line is keeping costs down. As it is labor intensive we have chosen to go a different route and pass the savings on to you.

The Musky Huntress Project

So occasionally I get some jobs that are pretty cool. Bri Herman, A Female Muskie Fishing personality (many of you may already know of her) has a Facebook® community page called the Musky Huntress. With over 3.5K likes this site is no joke (since Muskie Fishing is not a broad topic). Well in a conversation with Ms. Herman we decided to make a Musky Huntress Esox Box. Complete with Pink DOT Tape and pink handle straps. The box will also be emblazoned with the Musky Huntress Logo making it unique and hopefully very popular with our Female compatriots. So be watching not only on the Team Cordwood Facebook® page but Bri's page as well!

Final Product...Bling and all!

Expanding our virtual Horizons

Hello again,
in an effort to permeate the web with Team Cordwood we have added a new Google+ page. Check it out and if you are reading this and have a google+ page yourself...follow us and we will follow you!

Team Cordwood Google+

The PFS on the Verge!!!

So we have been modifying the PFS [formerly known as the Cordwood Caddy]. The key in building any of these things we build is to get a system down for size and assembly...tinkering if you will. Well we are on the verge of what I believe to be one of the best additions to the fishing industry to date. "Bob, you say, There are already caddy's out there!". You would be correct, however there is a very short list of split designs on the market out there. While we feel that any addition of any caddy is essential to those that fish with a butt seat, ours has some great features we think everyone may like. We are tirelessly working on improving this system to make it useful to all fishermen of any species. From the dimensions to the accessories we have tried and failed, stumbled and fell flat on our face all the while improving this system along the way and we are so close to having it. The dimension are good the accessories stellar now it's just down to building a half dozen to get the process refined. We have already built 2 prototypes with great success which mean that YOU, are about ready to see something very cool...very soon!

Shop Maintenance Part Deux!

Ok so I mentioned that we had other projects that were going to make our life easier. And they are almost done. So while assembling some boxes that are long overdue I completed one project and I am in the middle of the other. My Partner in crime Bill "Coach" Breeden has been down for the count with pneumonia so well wishes and prayers for his speedy recovery please!
 The 1st project which Coach had the biggest part in building I simply took his idea and finished the installation was a Suspended rack for our sheet goods. Quite the endeavor and honestly a little too big for a one man job but I did it anyway!

Now we have storage and a bit more room. In moving the sheet goods up it opened where they were stored so the plan was to create an accessory station where we could assemble small pieces. Not quite finished but I have a couple of PFS to finish so I will finish it shortly.

Both projects will help in the organization of the shop and hopefully increase productivity by keeping us from fumbling over all this stuff! Stay tuned as I will update the progress of this and other projects in the near future!

Cordwood Partnerships - The IMC

Partnerships are the backbone for making it in the world of fishing. Surprisingly enough you don't see much of it. Sure you have sponsors of events and things like that but I am talking a real partnership! One that mutually benefits both parties. Don't get me wrong I am all for Sponsors, without them some events dare I say most events couldn't even happen.

  Partnerships on the other hand can benefit both parties and more effectively generate sales/membership/attendance etc. etc. 

  Team Cordwood is all up in this. We have partnered with Musky Clubs and Tournaments and a couple comes to mind. First and foremost is our partnership with the IMC. The Indiana Muskie Classic which is held on the Barbee Chain - Lake Tippecanoe - Lake Webster was quite the experience. They purchased over a dozen boxes and invited us to fish the tournament as well (which by the way I landed my biggest Muskie to date....48 1/4") so needless to say I LOVE THAT TOURNAMENT!! but I digress. Jeremy and the gang do an amazing job on hosting this tourney so if you get a chance Check it out!

19th Annual IMC May 15th - 17th 2015